LCD Scaler Boards
The Gullwing interface controller for OEM monitor and packaged flat panel display solutions.Panels: 1280x1024,1024x768,800x600,640x480 TFT colour LCD & other
Input: Analog VGA, Video(PAL,NTSC), DVI-D,D-Sub,VGA & other
The LCD scaler boards generates all the necessary control signals and the panel data to drive TFT-LCDs. They performs image scaling on 24-bit RGB or YUV data stream and feeds the scaled pixels to LCD panel. They accept standard DVI and analog RGB and SYNC (CRT like) signals from any VGA /SVGA/XGA/SXGA video controller. They also accepts NTSC/PAL video sources through a composite Video or S-Video connector. An OSD (On Screen Display) logic is embedded.
The user interface includes Auto-Adjust, Phase, Brightness, Contrast, Horizontal and Vertical Position adjustment etc. An auto adjustment function provides automatic frequency, phase, H&V position, and white balance tuning.
Features:
Separate RGB Video signal
Composite Video Input ;Y/C Video & S-Video input
NTSC/PAL Auto-switching control
Build-in YUV to RGB colour space converter & de-interlace
Dual LVDS Interface Output
On-Screen Display Control
Support various panel from VGA to SXGA
RGB input Maximum resolution 1280×1024 (SXGA) @ 75Hz
Automatic mode detection
Automatic input source detection
Auto adjustment for frequency, phase, H/V position, and white balance
On chip brightness, contrast and gamma correction
VESA DDC1/2B: Software DDC1 and DDC 2B is supported
Build-in stereo audio device
Flexible firmware design to meet any custom design request
DVI input maximum resolution 1280×1024 (SXGA) @ 60Hz
Zoom scaling up and down
![]() |
JTR2A |
![]() |
JTR5U |
![]() |
JTR7X |
![]() |
JTG2A130 |
![]() |
G2A210 |
![]() |
JTR5W |
![]() |
JTB1V |
![]() |
R8X |
![]() |
JTR2H |
![]() |
R5TC |
![]() |
M1V |
![]() |
R2P |
![]() |
R2U |













